Oki B8300 - Manual (Page 50)

49 — Key operator programs
KEY OPERATOR
PROGRAMS
Using the programs
When using the key operator programs for the
first time, register a key operator code number.
When the machine is being operated from the
operator panel:
1. Press the [MENU] key. Press the [MENU]
key repeatedly until the message “KEY
OPERATOR PROGRAMS” appears.
KEY OPERATOR
PROGRAMS
2. Press the [OK] key.
ENTER KEY OPERATOR
CODE - - - -
The message shown above will appear.
3. Enter the first digit of your key operator
code number and press the [OK] key.
ENTER KEY OPERATOR
CODE * - - - -
The factory default setting of the key operator
code number is
00000.
The “-” at the first digit will change to “*” and “-
” at the second digit will blink. To correct the
entered number, press the [BACK/C] key.
4. Use the same procedure as step 3 to enter
the key operator code number from the
second digit to the fifth digit and then
press the [OK] key.
Press the Sor T key to select the desired
program and press the [OK] key.
For example, to register a key operator code
number, select [KEY OPERATOR CODE CHANGE]
and press the [OK] key.
5. Press the Sor T key to select the desired
item.
6. To exit the program, press the [MENU] key.