Oricom ULTRA 9400 - Manual (Page 18)

16
VIP Melody
This features allows you to assign a specific melody to
someone you want to get your attention when the person
calls.
When a VIP melody is assigned and that person calls, the
unit rings the normal ring for the first ring and then follows
with VIP melody ring. You may choose from ten different
polyphonic melodies and may store up to 10 VIP records.
Note:
This feature ONLY works when the following conditions
are met.
1. You have subscribed to Caller ID.
2. You have your Caller ID record previously transferred
to the phonebook. (Refer to Storing CID Records in
phonebook). NO USER MEMORY will show in the
display to remind the user to do CID record transfer first.
Storing VIP Melody
From the Handset Setup Menu:
1. Press the [ ] or [ ] button to scroll to VIP MELODY
sub-menu.
2. Press [ ] button to select VIP melody feature and
then display VIP 1 record.
- If VIP1 does NOT contain any specific number/records,
it will display EMPTY.
3. Press [ ] or [ ] button to select the specific VIP
melody memory location (10 VIP locations) that does
not contain any record.
4. Press [ ] button to display SELECT MEMORY.
Note:
If the memory location does not contain any CID memory
records and you are trying to mark a specific record
as VIP MELODY, then SELECT MEMORY will not be
displayed. Instead, NO USER MEMORY will display in
prompt to alert the user.
5. Press the [ ] or [ ] button to view the records from
memory to be selected as VIP.
6. Press [ ] button to confirm and then display VIP
MELODY 01 to wait for the melody tone selection.
7. Press the [ ] or [ ] button to select from melody 01
to melody 10 (a testing tone is generated while making
melody selection)
8. Press [ ] button to confirm.
Note:
If the desired number/record was previously stored in any
one of the ten VIP melody records, DUPLICATE NUMBER
shows in the display.
HANDSET SETup