Oricom ULTRA 9400 - Manual (Page 40)

38
Connecting the Belt Clip
1. To attach the belt clip, insert the sides of the belt clip
into the slots on each side of the handset.
2. Snap the ends of the belt clip into place.
Connecting an Optional Headset (not
included) to the Handset
Each handset can be used with an optional headset (not
included) for hands-free operation.
1. Connect the headset to the headset jack on the side of
the handset. The handset receiver and microphone are
disabled when the headset is connected.
2. Adjust the headset to rest comfortably on top of your
head and over your ear. Move the microphone to
approximately two to three inches from your mouth.
3. Press the [ ] button to answer a call or make calls
using the headset.
4. To return to normal operation, unplug the headset from
the jack.
BELT CLIp AND OpTIONAL HANDSET