Quadra-Fire 3100 31M-ACC-MBK - Manual (Page 13)

March 2, 2007 7033-277C Page 13
3100 Wood Stove Series (ACC) R
Must extend 2 in. (51mm) beyond
each side of pipe (shaded area)
NOTE: • Illustrations and photos refl ect typical installations and are FOR DESIGN PURPOSES ONLY.
• Illustrations/diagrams are not drawn to scale.
• Actual installation may vary due to individual design preference
• Hearth & Home Technologies reserves the right to alter its products.
16 in. from glass
8 in.
USA
Fuel loading door
4-3/4 in. 3-1/4 in.
31-5/8 in.
minimum
39-5/8 in.
minimum
CANADA
203mm (8 in.)
203mm
(8 in.)
203mm
(8 in.)
457mm (18 in.)
1254mm
(49-3/8 in.)
minimum
1041mm (41 in.)
minimum
USA required
Canada recommended
Figure 13.3
Figure 13.1
Figure 13.2
Figure 13.4
Step-Top Uni-Body Model
For the Step Top Pedestal Model In US installations, it is
necessary to install a fl oor protector of a minimum of 3/8 inch
(9.5mm) thick metal clad millboard or equivalent a minimum of
16 inches (406mm) in front of glass and 8 inches (203mm)
to both sides of the fuel loading door. Open the door and
measure 8 inches (203mm) from the side edge of the open-
ing in the face of the appliance. *See page 12 for Canadian
clearances and horizontal venting exception. For the Step Top Leg Model In US installations, it is nec-
essary to install a fl oor protector of a minimum thickness of
1-1/4 inch (32mm) or 1/2 inch of “k” value of 0.84 thick metal
clad millboard or equivalent a minimum of 16 inches (406mm)
in front of glass and 8 inches (203mm) to both sides of the
fuel loading door. Open the door and measure 8 inches
(203mm) from the side edge of the opening in the face of
the appliance. *See page 12 for Canadian clearances and
horizontal venting exception.
op
tio
na
l co
ve
ra
ge
op
tio
na
l
co
ve
ra
ge
15
-7
/8
in
.
49-7/8 in.
op
tio
na
l
co
ve
ra
ge
39
-5
/8
in
.
16
in
.
31
-5
/8
in
.
27-5/8 in.
27-5/8 in.
11
-3
/8
in
.
re
qu
ire
d
co
ve
ra
ge
49-7/8 in.
USA