Toshiba MK4006GAH - Manual (Page 80)

Toshiba Corporation Digital Media Network Company
Page 80 of 153
© 2003, Copyright TOSHIBA Corporation All Rights Reserved
Table 11.8-3 Identify Information (Continued)
WORD DESCRIPTION Hex.
83 Command set supported.
0000h or FFFFh = command set notification not supported
15 0 (Fixed)
14 1(Fixed)
13 1=FLUSH CACHE EXT command supported
12 1=FLUSH CACHE command supported
11 1=Device Configuration Overlay supported
10 1=48-bit Address feature set supported
9 1=Automatic Acoustic Management feature set supported
8 1=Set MAX security extension supported
7 Reserved
6 1=SET FEATURES subcommand required to spin up after power-up
5 1=Power-Up in Standby feature set supported
4 1=Removable Media Status Notification feature set supported
3 1=Advanced Power Management feature set supported
2 1=CFA feature set supported
1 1=READ / WRITE DMA QUEUED supported
0 1=DOWNLOAD MICROCODE command supported 7D09
84 Command set/feature supported extension
15 0 (Fixed)
14 1(Fixed)
13 1(Fixed)
12-6 Reserved
5 1=General Purpose Logging feature set supported
4 1=Reserved
3 1=Media Card Pass Through Command feature set supported
2 1=Media serial number supported
1 1=SMART self-test supported
0 1=SMART error logging supported 6023
85 Command set/feature enabled
15 Reserved
14 1=NOP command enabled
13 1=READ BUFFER command enabled
12 1=WRITE BUFFER command enabled
11 Reserved
10 1=Host Protected Area feature set enabled
9 1=DEVICE RESET command enabled
8 1=SERVICE interrupt enabled
7 1=release interrupt enabled
6 1=look -ahead enabled
5 1=write cache enabled
4 1=PACKET Command feature set supported
3 1=power management feature set enabled
2 1=removable feature set enabled
1 1=Security feature set enabled
0 1=SMART feature enabled XXXX
86 Command set/feature enabled
15-14 Reserved
13 1=FLUSH CACHE EXT command supported
12 1=FLUSH CACHE command supported
11 1=Device Configuration Overlay supported
10 1=48-bit Address feature set supported
9 1=Automatic Acoustic Management feature set enabled
8 1=SET MAX security extension enabled by SET MAX SET
PASSWORD
7 Reserved
6 1=SET FEATURES subcommand required to spin-up after power-up
5 1=Power-Up In Standby feature set enabled
4 1=Removable Media Status Notification feature set enabled
3 1=Advanced Power Management feature set enabled
2 1=CFA feature set enabled
1 1=READ / WRITE DMA QUEUED supported
0 1=DOWNLOAD MICROCODE command supported XX0X