Toshiba MK4006GAH User Manual

Page 89

Advertising
background image

Toshiba Corporation Digital Media Network Company

Page 89 of 153

© 2003, Copyright TOSHIBA Corporation All Rights Reserved

WORD 90: Time required for Enhanced Security erase completion

WORD 91: Current Advanced Power Management setting

bit 15-8

Reserved

bit 7-0

Current Advanced Power Management setting set by Set Features Command.

The default value for this WORD is0080h.

WORD 92: Master Password Revision Code

the value of the Master Password Revision Code set when the Master Password was last change. Valid
values are 0001h through FFFEh. A value of 0000h or FFFFh indicates that the Master Password
Revision is not supported.

WORD 93: Hardware configuration test results

bit 15

0 (Fixed)

bit 14

1 (Fixed)

bit 13

1=device detected CBLID- above V

IH

0=device detected CBLID- below V

IL

bit12-8

Device 1 hardware reset result. Device 0 shall clear these bits to zero.
Device 1 shall set these bits as follows :

12 Reserved.
11

0=Device 1 did not assert PDIAG-.
1=Device 1 asserted PDIAG-.

10-9 These bits indicate how Device 1 determined the device number:

00=Reserved.
01=a jumper was used.
10=the CSEL signal was used.
11=some other method was used or the method is unknown.

8

1 (Fixed)

bit 7-0

Device 0 hardware reset result. Device 1 shall clear these bit to zero.
Device 0 shall set these bills as follows:

7 Reserved.
6

0=Device 0 does not respond when Device 1 is selected.
1=Device 0 responds when Device 1 is selected.

5

0=Device 0 did not detect the assertion of DASP-.
1=Device 0 detected the assertion of DASP-.

4

0=Device 0 did not detect the assertion of PDIAG-.
1=Device 0 detected the assertion of PDIAG-.

3

0=Device 0 failed diagnostics.
1=Device 0 passed diagnostics.

2-1

These bits indicate how Device 0 determined the device number:
00=Reserved.
01=a jumper was used.
10=the CSEL signa was used.
11=some other method was used or the method is unknown.

0

1 (Fixed)

WORD 94: Current automatic acoustic management value

bit 15-8 Vendor’s recommended acoustic management value
bit 7-0

Current automatic acoustic management value

This function is not supported. The value for this WORD is 0000h.

WORD 95-99: Reserved

WORD 100-103: Maximum User LBA for 48-bit Address feature set

The value for this WORD is XXXXh.

WORD 104-126: Reserved

WORD 127: Removable Media Status Notification feature set supported
This function is not supported. The value for this WORD is 0000h.

Advertising
This manual is related to the following products: