T+A Elektroakustik K1 CD-RECEIVER - Manual (Page 30)

30
Menu point 2: PRESET - PRESET function 2: AUTOMATIC PRESET STORING (AUTOSTORE)
OK
or
. .
9 OK
P01 AUTO
SRC
press
2x
Introduction:
If you select automatic preset storing, the
tuner automatically searches the whole VHF
band twice (using different search thresh-
olds) for stations which can be received well
in STEREO mode, and automatically stores
the stations it finds.
This process can take some time, as the tuner
attempts to receive the complete RDS station
name for each station it finds, so that the
name can be stored in the preset.
If the AUTOSTORE function does not pick
up the RDS station name, but at a later date
the tuner is able to receive it when you are
tuned to that preset, then the station name
appears on the screen and is automatically
stored with the preset.
Operation:
To use the AUTOSTORE function press the
remote control buttons in the sequence
shown above.
As with the manual preset storing procedure
you can use the
    and     buttons or the
numeric buttons to select a preset number as
the starting point, i.e. the stations the system
locates will be stored after that number.
If you want to store the station information
starting at the beginning, then you should
select the number 01.
If none of the menu control buttons
(
   ,     /     or    ) are pressed
for a period of about ten seconds, the unit
interrupts the special functions menu and
reverts to the standard display. (time-out)
Pressing the     button now activates
the AUTOSTORE function, and the fre-
quency display starts to rise incrementally.