T+A Elektroakustik K1 CD-RECEIVER User Manual
Page 7
7
Pre-amplifier functions:
Raises / lowers the volume in
1.25 dB increments.
Switches the loudspeaker output
A On / Off.
Switches the loudspeaker output
B On / Off.
Short keypress:
Switches LOUDNESS On / Off.
Long keypress (approx. 1 sec.):
Switcess low bass enhancement
On / Off.
Mechanism and pre-set control:
These buttons are used to control the CD
player and tuner.
Skip track or pre-set, backwards.
Starts CD playback; skip track or
pre-set, forwards.
Back, or increase frequency.
Forward, or reduce frequency.
Switches CD to pause mode.
Halts CD playback.
Menu control:
Opens the seperate menu of the
current source device.
Opens the seperate menu of the
amplifier.
The buttons and rocker switches for the menu
control system vary according to the mode
currently selected. To move around within
the menus you need to use the buttons
,
,
,
and
in the mecha-
nism control area.
Special functions
In tuner mode this button switches
radio text display for the current
station ON/OFF.
In CD mode this button switches
the display from DIS TIME to
DIS TRACK.
Battery compartment:
To open the battery compartment press in the
latch on the underside of the remote control
handset. And remove the cover. Place 3 new
LR03 (MICRO) batteries in the holder fol-
lowing the engraved markings. Close the
battery compartment.
Changing the remote control level:
Press the buttons
and from
the numeric pad for about 10 seconds. The
LED will flash. Now press the numeric pad
button
or .
Number button
sets the remote
control handset to the normal remote control
level; number button
sets the alter-
native level. The LED will go out to confirm
that the switch has taken place.