T+A Elektroakustik K1 CD-RECEIVER User Manual
Page 9
9
SOURCE SELECT
The term source device means the compo-
nents of a Hi-Fi system which supply a sound
signal, such as tuner, CD player, cassette
deck etc. Pressing the
button shows
the system's currently active source device on
the screen. Pressing this button repeatedly
cycles through the available source devices
TUNER
1)
- CD
1)
- TV
2)
- TAPE
2)
1)
Internal
2)
External
MONITOR
Pressing this button switches between the
current auditioning source and the TAPE
monitor, so that you can check the quality of
the recording being made on a tape deck
while the material is actually being recorded.
STOP
OPEN
Combination button for ending CD playback
(
= STOP) and for opening and
closing the CD drawer (
= OPEN).
PAUSE
TIMER ON
Pauses CD playback, i.e. the track currently
playing is interrupted. Playback resumes
when you press the button a second time.
The same button is used to switch the Timer
on and off when the tuner has been selected
as the auditioning source.
PLAY
BACK / FORWARD
Combination button for starting CD play-
back, for jumping to a particular track and for
changing presets when using the tuner.
A brief press starts the CD from STOP mode
(PLAY function).
When the CD is playing, pressing this button
jumps to the start of the next track, or selects
the next preset.
Press this button for longer than 1 second to
jump to the start of the preceding track. You
can jump back several tracks in this way; in
tuner mode hold it pressed in to select the
preceding preset.
VOLUME
The machine features a digital volume con-
trol system. Every time you press the left-
hand VOLUME button the volume level is
reduced. Every time you press the right-hand
VOLUME button the volume level is in-
creased.
The current volume level is shown briefly on
the screen. If you hold one of the VOLUME
buttons pressed in for longer than a second,
the volume alters continuously until you re-
lease the button again.
In Timer mode these buttons are used to ad-
just the alarm time.