T+A Elektroakustik K1 CD-RECEIVER User Manual
Page 35
35
CONTROLLING THE CD MECHANISM
Selects the previous track during
playback.
Starts CD playback, selects the
next track during playback.
Fast search backwards to locate a
particular passage.
Fast search forward to locate a
particular passage.
Note:
After about two seconds the search
speed rises. At the low search
speed you can listen to the music,
but at the higher speed the output
is muted. During the search proc-
ess the current track time is shown
on the left of the screen. When the
search reaches the start or end of
the CD, the CD stops.
Ends playback; the screen shows
the message: 'STOP'.
Interrupts playback, i.e. the current
track is paused. The screen shows
'PAUSE'. A further brief press on
the
button resumes play-
back.
Pressing the
button in
STOP mode starts PAUSE mode
and causes a jump to the first track
of the CD resp. the MEMO pro-
gram
Selects the playback mode (see
Menu control system).
NUMERIC TRACK SELECTION
:
Direct numeric input for selecting
a track number.
When you press a numeric button
(e.g. 1) the screen shows:
'SELECT 1_.
For a period of 3 seconds a marker
flashes. During this time you may:
• press a second numeric button to
complete a two-digit track num-
ber - the machine plays the se-
lected track immediately.
• If you do not press a second
button and the 3-second period is
over, the input assumed as a sin-
gle-digit track number - the ma-
chine plays the selected track.
Note:
You can also enter a track number
directly when the CD drawer is
still open. In this case the drawer
closes automatically and playback
starts with the track you have se-
lected.
This button is used to store MEMO
programs. If the menu control sys-
tem is in use,
acts as the
confirmation button (see Menu
control system).