Tungsten Affinity TUNGSTUN T3 - Manual (Page 103)

Making connections from Contacts
89
Quick Connect
If you have a compatible GSM mobile phone (sold separately), you can use Quick
Connect to select a contact and initiate a related task with one hand, using the
navigator. You can also configure which application opens when you choose a
specific Contacts record field, and whether to add a prefix to all phone numbers.
To use Quick Connect from a contact:
1. Open the contact to which you want to connect.
2. Press Right on the navigator to open the Quick Connect dialog box.
TIP You can also tap the Quick Connect icon in the title bar of the
Contacts record.
3. Select the method you want to use to connect.
Quick Connect initiates the related task. For example, if you tap a phone
number, Quick Connect sends the selected phone number to your mobile
phone.
To use Quick Connect from the Contacts list:
1. Highlight the contact to which you want to connect.
2. Tap the Menu icon .
3. Select Connect on the Record menu.
4. Select the method you want to use to connect.
Quick Connect initiates the related task. For example, if you tap a phone
number, Quick Connect sends the selected phone number to your mobile
phone.
NOTE To use the Quick Connect feature, you must have all the requirements
for that connection type. For example, to connect by tapping an e-mail address,
you must have installed the e-mail application on your handheld and have an
e-mail account with an Internet service provider (ISP). See the documentation
included with the desired connection type for requirements to use that
connection type.