Tungsten Affinity TUNGSTUN T3 - Manual (Page 24)

Chapter 2 Exploring Your Handheld
10
Locating back panel components
Stylus The stylus is your writing and tapping tool. To use the stylus,
gently press the top of the stylus to release it from the slot,
and then pull it out of the slot and hold it as you would a pen
or pencil.
IR port The port uses infrared technology to transmit data to and
receive data from other infrared-enabled devices and to
perform HotSync
® operations. See “Beaming data” in
Chapter 3 and see “Conducting IR HotSync operations” in
Chapter 20 for more information.
Reset button Resets your handheld. Under normal use, you should not
have to use the reset button. See
“Resetting your handheld”
in Appendix A for information about when and how to use
the reset button.
Attach points Enable you to connect optional accessories to your
handheld, such as a modem or sled. These accessories are
sold separately and are typically available from Palm and
third-party developers.
Universal
connector
Reset
button
Attach
points