Editing connections – Tungsten Affinity TUNGSTUN T3 User Manual
Page 323
Connection Preferences
309
You can also create custom configurations, which include the following:
Editing connections
The following example shows you how to edit the IR to GSM Phone connection to
adjust the communication speed; you can similarly edit other connections or
settings or create a custom connection. You can use the IR to GSM Phone
Phone to Bluetooth:
A connection between your handheld and
a Bluetooth phone.
TIP
For Global System for Mobile Communications (GSM)
phones, use Phone Link to quickly establish a connection with a
Bluetooth GSM phone. For more information, see
.
LAN to Bluetooth:
A connection between your handheld and a
Bluetooth local area network.
PC to Bluetooth:
A connection between your handheld and a
Bluetooth computer or laptop.
PC to Cradle/Cable:
A local HotSync connection—the direct
connection between your handheld and your desktop
computer. Your handheld is connected by its universal
connector to the cradle/cable, and the cradle/cable is attached
to a USB port of your desktop computer. (If you are using the
optional serial cradle/cable, the cradle attaches to a serial
[COM] port of your computer.)
Modem to Universal connector:
A cable connection between
your handheld’s universal connector and a modem for dialing
in to a modem that is part of your computer or laptop.
PC to Infrared:
A connection between the IR port of your
handheld and the infrared device of your computer or laptop.
Modem to Infrared:
A connection between the IR port of your
handheld and a modem. The modem can be attached to or
within a mobile phone or other device containing an IR port.
(Some IR phones contain modems.)