Tungsten Affinity TUNGSTUN T3 - Manual (Page 127)

Setting up a phone connection
113
9. When the Confirmation dialog box appears, tap Yes.
IMPORTANT If you tap No in the Confirmation dialog box, the link between your
phone and handheld will not work.
10. Tap Done.
The Network Service dialog box appears.
11. Tap Yes, and then follow the instructions in the next section to set up network
services for your phone.
Configuring network service settings for your phone
If you want to use your handheld to connect to the Internet and to send and receive
e-mail, you must configure network service settings for your phone.
To configure a GPRS high-speed wireless data service connection for your phone:
1. After tapping Yes in step 11 of the preceding procedure, tap Next on the
Network Service Setup screen.
If you do not see the Network Service Setup screen, tap the Home icon , select
the Phone Link icon , and then tap the Network Service box.
2. Tap Yes when asked if you subscribe to a high-speed data service.
3. Tap Next.
4. Tap the Select the area... pick list and select your mobile phone carrier’s location.