Tungsten Affinity TUNGSTUN T3 - Manual (Page 325)

Connection Preferences
311
Creating Bluetooth connections
You can use the Connection Preferences screen to create connections to the
following types of Bluetooth devices:
■ GSM mobile phones (See “Connecting to non-GSM phones” later in this chapter
for information on connecting to other mobile phones.)
TIP For Global System for Mobile Communications (GSM) phones, use Phone
Link to quickly establish a connection with a Bluetooth GSM phone. For more
information, see
Chapter 12 .
■ Computers
■ LAN access points
■
High-speed wireless data networks (such as a General Packet Radio Service
[GPRS] network)
High-speed wireless data networks provide an “always on” network connectivity
and high-speed wireless data transmission. To connect to a high-speed wireless
data network, you must have a GSM mobile phone, the correct driver for your
phone, a subscription to high-speed wireless data network services with your
mobile phone carrier, and the correct high-speed wireless data network settings for
your carrier.
TIP You can also create a connection with a GSM phone by using the Phone Link
application. We recommend using Phone Link to create phone connections. See
Chapter 12 for details. Use the steps described in these sections only if you are
unable to create a connection with Phone Link.
To create a Bluetooth to LAN connection:
1. From the Communications Preferences list, select Connection.
2. Tap New.
Tap here