Channel planning, Installation, Mounting hardware – Trango Broadband TrangoLink-10 User Manual
Page 22
Deployment & Installation
Channel Planning
Trango Broadband Wireless — TrangoLINK-10 User Manual Rev. E 3.0
page
18
Results are reported in dBm per channel as average and peak. A channel is reported to be “Clear” if the peak and
average are below the RF RX Threshold by more then 8 dB.
Channel Planning
For installations involving co-location of radios operating in the same band, channel planning is extremely important.
Use of the 5.8 GHz spectrum ISM band will allow maximum co-location potential.
See
www.trangobroadband.com
for additional information on channel planning schemes.
Installation
Once the site survey is completed, you are ready to install your radios. It is recommended to install the MU first. The
reason for this is that the RU has a built-in RSSI tool that will help you properly aim the RU at the MU to achieve
maximum signal strength.
Mounting Hardware
Both MUs and RUs are supplied with mounting hardware for pole installations. See diagram below for proper use of the
mounting hardware.