Telstrat Argent User Manual
Page 26
Argent Terminal Adaptor - User Guide
Version 1.1
Telstra Corporation Limited
Page 26/29
ACN 051 775 556
If you do not have access to a computer, you can enable CLIR on a
permanent basis using the following handset commands:
a
Enable CLIR for the port to which the handset is
connected
OH DT #8#1# RH
b
Disable CLIR for the port to which the handset is
connected
OH DT #8#0# RH
c
Check if CLIR is enabled or disabled (double tone
indicates that CLIR is enabled; triple tone indicates that
CLIR is disabled)
OH DT #8#*# RH
5.2.4 Call Line Presentation (CLIP)
When CLIR is not in effect, the incoming call’s telephone number is stored in register
S65 for Voice (telephone) calls and S67 for Data calls (see section 4.3) will be presented
by the remote end initiating the call.