Telstrat Argent User Manual
Page 3
Argent Terminal Adaptor - User Guide
Version 1.1
Telstra Corporation Limited
Page 3/29
ACN 051 775 556
Table of Contents
1
INTRODUCTION
5
2
SCOPE
5
3
DESCRIPTION
5
3.1
Application
5
3.2
Definitions
6
3.3
Package Contents
6
3.4
Back Panel
7
3.5
Top Panel Seven Segment Display
8
3.6
ATA Activation Instructions
9
3.6.1
Prepare position
9
3.6.2
Connect ATA to NT1
9
3.6.3
Connect the EFTPOS terminal to ATA
9
3.6.4
Power-up the ATA
10
3.6.5
Adjust the Display Orientation of the ATA
10
3.6.6
Select the Required TEI Number
10
3.6.7
Observe D-Channel X.25 Call Progress For the First Call
10
3.6.8
Observe D-Channel X.25 call Progress For the Second Call
10
3.6.9
Observe the Software Download
11
3.6.10
Observe for Configuration File Errors
11
3.6.11
Observe for Failure to Connect
11
3.6.12
Observe that the ATA is ready and record the service details
12
3.6.13
Replace the ATA if Faulty on Arrival
12
3.6.14
Point-to-Point Protocol (PPP) Installation
13
3.6.15
Installing Dial-Up Network
15
3.6.16
Configuring Dial-Up Networking (DUN)
16
3.6.17
V.120 Setup
17
3.6.18
Connect the EFTPOS terminal
17
3.6.19
End to end test
17
3.7
ATA Maintenance
18
3.7.1
Check the Seven Segment display
18
3.7.2
Check that the Power is On
18
3.7.3
Restart the ATA
18
3.7.4
Perform a Cold Reboot on the ATA
18
3.7.5
Test the OnRamp
®
2 D-channel X.25 facility
18
3.7.6
Contact the Service Provider and Replace the ATA
18
3.7.7
Maintenance by Telstra
19
3.7.8
Customer Network Management (CNM)
19
3.8
Warranty
19
3.8.1
ATA faulty on arrival
19
3.8.2
ATA under Warranty - with Telstra Service Assurance
19
3.8.3
ATA under Warranty - without Telstra Service Assurance
19
3.8.4
ATA out of Warranty - with Telstra Service Assurance
20