Telstrat Argent User Manual

Page 27

Advertising
background image

Argent Terminal Adaptor - User Guide

Version 1.1

Telstra Corporation Limited

Page 27/29

ACN 051 775 556

5.2.5 Call Forward

Call forward allows calls to be forwarded to any other telephone including mobiles either
immediately, when busy or if the call is not answered.

5.2.5.1 Call Forward Immediate or Unconditional

Call Forward Immediate also called Call Forward Unconditional (CFU) will direct all
incoming phone calls to another phone until the feature is turned off.

a

To turn Call Forward Immediate (Variable Number) ON.

OH * 21 DN # RH

b

To turn Call Forward Immediate (Variable or Fixed
Number) OFF.

OH # 21 # RH

c

To check if Call Forward Immediate is ON or OFF

OH * # 21 # RSP RH

5.2.5.2 Call Forward On Busy

Call Forward On Busy (CFB) will direct a phone calls to another phone when the line is in use.

a

To turn Call Forward Busy (Variable Number) ON.

OH * 24 DN # RH

b

To turn Call Forward Busy (Variable Number) OFF.

OH # 24 # RH

c

To check if Call Forward (Variable Number) is ON or
OFF.

OH * # 24 # RSP RH

5.2.5.3 Call Forward No Answer

Call Forward No Answer or Call Forward No Reply (CFNR) will direct a phone calls to another phone
when the call rings unanswered.

a

To turn Call Forward No Answer (Variable Number) ON.

OH * 61 DN # RH

b

To turn Call Forward No Answer (Variable Number)
OFF.

OH # 61 # RH

c

To check if Call Forward (Variable Number) is ON or
OFF.

OH * # 61 # RSP RH

5.2.6 Multiple Subscriber Number (MSN)

Usually two telephone numbers are automatically assigned to an OnRamp service.
Before an MSN number is entered into the AT command registers on the ATA, phoning
any subscribed number from another phone service will make an attached phone ring. It
is possible to have up to eight phone numbers on a single OnRamp service by requesting
them from Telstra. The ATA picks up all phone calls unless a specific number is set up
for MSN in the ATA for exclusive pick up. Exclusive pick up would be used when the
ATA is meant to respond to calls on a different phone number to another device on the
same OnRamp service.

Advertising