TAG 1000 - Manual (Page 11)

MIL-BOOK™
OPERATORS MANUAL
- xi -
CHAPTER 2. OPERATION 2-1
2.1 Introduction 2-1
2.2 Opening and Closing the Notebook 2-1
2.2.1 Opening the Cover 2-1
2.2.2 Closing the Cover 2-1
2.2.3 Opening the PCMCIA, FDD, CD ROM/DVD/COMBO, DVD RW Door 2-2
2.2.4 Closing the PCMCIA, FDD, CD ROM/DVD/COMBO, DVD RW Door 2-2
2.3 Connecting and Installing Devices 2-2
2.3.1 Serial and Parallel Port 2-3
2.3.2 External Power Adapter 2-3
2.3.3 Floppy Disk Drive/CD-ROM/DVD/COMBO/DVD RW 2-4
2.3.3.1 Replace the FDD/CD-ROM/DVD/COMBO/DVD RW: 2-4
2.3.4 Loading and Remove Diskettes 2-5
2.3.5 PCMCIA Cards 2-5
2.3.6 Hard Disk 2-5
2.3.7 Hard Disk Drive Module 2-6
2.3.8 IEEE 1394 2-7
2.3.9 EMI Accessory Descriptions 2-8
2.4 First Time Use 2-9
2.4.1 Installing Software Drivers 2-9
2.4.2 Install Device Driver for Windows 2000/Windows XP 2-10
2.4.3 Install Touch Screen Driver for Windows 2000 2-11
2.4.4 Installing Drivers for Windows XP 2-11
2.4.5 Install Touch Screen Driver for Windows XP 2-12
2.5 Daily Operation 2-19
2.5.1 Starting the Computer 2-19
2.5.2 Turning Off The Notebook 2-20
2.5.3 Using the Notebook in the Car 2-20
2.6 Using External Power Sources 2-21
2.6.1 Using AC External Adapter 2-21
2.6.2 Charging the Batteries 2-22
2.7 Running On Battery Power 2-22
CHAPTER 3. SETUP CONFIGURATION UTILITY 3-1
3.1 Introduction 3-1
3.2 Running SETUP and Moving Around 3-1
3.2.1 Main 3-2
3.2.2 Moving Around and Making Selections 3-2
3.2.2.1 Main Menu 3-3
3.2.2.2 Date and Time 3-3
3.2.2.3 Internal Num Lock 3-4
3.2.2.4 USB Emulation 3-4
3.2.2.5 Keyboard Backlight 3-5
3.2.2.6 Advanced Menu 3-5
3.2.2.7 Geyserville Support 3-6