TAG 1000 - Manual (Page 57)

MIL-BOOK™
OPERATORS MANUAL
- 3-5 -
3.2.2.5 Keyboard Backlight
When the LED Keyboard Backlight need light at power on status, then select
the “Keyboard Backlight “ setting is Enable.
When the LED Keyboard Backlight need dark at power on status, then select
the “Keyboard Backlight “ setting is Disable.
The Fn+ F8 function can toggle Backlight of the keyboard light or dark, but
Fn+F8 can’t effect the CMOS Setup of the “Keyboard Backlight” item.
Figure 3-6 Keyboard Backlight
3.2.2.6 Advanced Menu
The Advanced pull-down menu, as shown below, contains the I/O
configuration settings of the system.
Figure 3-7 Geyserville Support