TAG 1000 User Manual
Page 62
MIL-BOOK™
OPERATORS
MANUAL
- 3-10 -
3.2.4 Boot Menu
The Boot pull-down menu, as shown below, displays ways of Boot SCU. After
finished with your settings, you must save and exit SCU so that the settings can
take effect. The “Boot Sequence” has four device item sets.
When this item is selected, the submenu will display as shown below.
Figure 3-16 Boot Menu
Sets the first, second, third and fourth booting device. The system will try to boot
from the first device but if it is not available, will try the next boot device. If you
set the first boot device to LAN, the system will boot from the LAN server first.
The optionals are Hard Disk C, CD-ROM Drive, Diskette A, and LAN. The
default setting is Diskette A, Hard Disk C, CD-ROM Drive, then LAN Boot.
NOTE
If you set all booting options to the same device, then the computer will try to boot from
that device only.