TAG 1000 User Manual

Page 26

Advertising
background image

MIL-BOOK™

OPERATORS

MANUAL

- 1-13 -

4. When any battery pack is present, then the BATTERY LED (Green) is on in

power stage.

5. When the optional battery pack ( Bay 1 or Bay 2) enters battery low status,

then the BATTERY LOW LED (Orange) is on. When if only the primary
battery and battery low status then speaker will beep and blinks.

6. When the HDD, FDD or CD-ROM/DVD/COMBO/DVD RW drive is active,

then the HDD/FDD/CD/DVD/COMBO/DVD RW LED (Orange) is on.

7. The “Num Lock” key activates and deactivates the embedded numeric

keypad. When the numeric keypad is active, the “Num Lock” indicator come
on and the alphabetic of the embedded numeric keypad are disabled.

8. Press “Caps Lock” key will Charge the state of “Caps Lock” indicator

between on and off, if the Caps Lock indicator goes on, represents the all
English alphabet keys work in Upper Case state, otherwise the keys work in
Lower Case state.

9. The “Scroll Lock” key works with some software to freeze the display. Then

the cursor can move about the screen without the top bottom or any lines in
between moving.

1.5.9 Battery Pack

The removable battery pack, with on-line charge capability, comes standard with
the MIL-BOOK 1000. The battery pack provides power to the system when the
AC power is “Off” or not connected. The primary battery type is Li-ion. At 4.2V,
the battery pack consists of twelve cells. The capacity of each cell is 2200 mAH
or more. The output voltage of the battery pack is 11.1V. The MIL-BOOK 1000
can be fitted with up to two batteries. The primary battery is 97whr and an
auxiliary battery is 65whr. The batteries can be hot-swapped.

1.5.10 Low

Battery

Indication

When the battery voltage falls under the low battery status, the system will beep
or the orange “Battery Low” LED status indicator will come on.

• When the optional battery pack (in Bay 1 or 2) enters into low battery status,

the orange “Battery Low” LED will come on.

• When the primary battery pack enters into low battery status, the system will

beep and blinks in DOS mode.

• If Bay 1 or Bay 2 battery is in battery low status system just only have battery

low LED indicate in orange, if primary battery is in battery low status system
will have battery low beep indication.

Advertising