Tektronix Waveform Monitors WFM700 Series - Manual (Page 27)

Menus
2- 12 WFM700 Series Waveform Monitors User Manual
Using the Menu Diagrams
The menu diagrams contain the following components (see Figure 2--3):
1. A partial illustration of the instrument front panel, highlighting the front-
panel button you select to enter the displayed menu.
2. Menu names, shown in bold text.
3. Unique submenus, connected with a dashed line. These soft keys appear only
when a certain mode, such as Arrowhead, is selected.
4. A list of menu soft keys that are displayed on the touch screen. Touching one
of these soft keys either activates a feature or enters a submenu.
5. Submenu names, shown in bold text.
6. Submenu soft keys.
7. A vertical line ( | ) separates two options on a toggle soft key. A slash ( / )
may also be used to separate multiple options from which you can select.
8. Variables, usually controlled by the general purpose knob, are shown as
ellipses or generic names inside angle brackets <...> .
WFM
VECTOR
PICTURE MEASURE
STATUS
GAMUT EYE
AUDIO
MULTI
VIEW
(4) Menu soft keys (6) Submenu soft keys (5) Submenu names
(1) Selected
button
(3) Dashed lines showing
unique submenus
Gamut Menu
(7) Vertical line
separating options
(2) Menu name
(8) Brackets
representing a variable
Diamond
Split Diamond
Arrowhead
Set Thresholds
High: < . . . >
Low: < . . . >
Horizontal | Horz + Vert
Area: < . . . >
Default Settings
Done
Limit Fmt < . . . >
High: < . . . >
Horizontal | Horz + Vert
Area: < . . .%>
Default Settings
Done
NTSC
PAL
Auto
Done
Composite Limit Menu
Limit Fmt Menu
RGB Limit Menu
Setup : < . . . >
Set Thresholds
Figure 2- 3: Example menu diagram showing components of the diagram