Tektronix Waveform Monitors WFM700 Series - Manual (Page 38)

Menus
WFM700 Series Waveform Monitors User Manual 2- 23
Gamut Menu
Press the GAMUT button to enter the Gamut mode and display the Gamut menu
shown in Figure 2--14. Use the Gamut menu to view the Diamond, Split
Diamond, or Arrowhead displays, and to set the gamut measurement limits.
Refer to Gamut Measurements on page 3--27 for more information.
RGB High: < . . .mV >
RGB Low: < . . .mV >
Horizontal | Horz + Vert
Area: < . . .% >
Default: . . . . .
Done
Limit Fmt < . . . >
Y+C High: < . . . >
Y+C Low: < . . . >
Horizontal | Horz + Vert
Area: < . . .%>
Default: . . . . .
Done
NTSC
PAL
Auto
Done
WFM
VECTOR
PICTURE MEASURE
STATUS
GAMUT EYE
AUDIO
MULTI
VIEW
Composite Limit Menu
Limit Fmt Menu
RGB Limit Menu
Gamut Menu
Diamond
Arrowhead
Set RGB Thresholds
Setup 0% | Setup 7.5%
Set Y+C Thresholds
Luma High: < . . .mV >
Luma Low: < . . .mV >
Horizontal | Horz + Vert
Area: < . . .% >
Default: . . . . .
Done
Luminance Limit Menu Set Luma Thresholds
Diamond: Standard | Split
Figure 2- 14: Gamut menu diagram