Tektronix Waveform Monitors WFM700 Series - Manual (Page 40)

Menus
WFM700 Series Waveform Monitors User Manual 2- 25
Line Select Menu
Press the LINE SEL button to enable the Line Select mode and open the menu
shown in Figure 2--17. Operating modes that support the line select function are
Waveform, Vector, Gamut, Jitter, Eye, and Data. Refer to Line Select Mode on
page 3--31 for more information.
SWEEP GAIN
CURSOR
LINE SEL
INPUT
All Fields
Sample < . . . >
Field: 1 of 2 | 2 of 2
Line < . . . >
Line Select Menu
Figure 2- 17: Line Select menu diagram
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176 - FAX 781.665.0780 - TestEquipmentDepot.com