Tektronix Waveform Monitors WFM700 Series - Manual (Page 31)

Menus
2- 16 WFM700 Series Waveform Monitors User Manual
HELP
PRINT
FREEZE
DISPLAY
CONFIG
PRESET
Audio Displays
Audio Thresholds
(Option DG audio
module only)
Audio Presence Readout: Off | On
Meter Ballistics: VU | PPM | True Peak
Peak Hold Time: 2 sec
Peak Hold Display: Off | On
Set 0dB Mark To: dBFS | Peak Program Level | Test Level
Lissajous AGC: Off | On
Dominance Indicator: Disabled | Enabled
Surround Sound Filter: Linear (RMS) | A-Weighting
Test Level: --18 dB
Peak Program Level: --8 dB
# of Samples for Clip: 1
# of Samples for Mute: 10
Silence Level: --60 dB
Over Level: --8 dB
Duration for Silence/Over: 5 sec
Configure Menu
These menu selections
appear only when an
Option DG audio
module is installed.
Configure menu continued
from Figure 2--6
Configure menu continues
in Figure 2--8
Audio Inputs/Outputs
(Option DG audio
module only)
AES Connectors: Input | Output
Audio Program Type: Stereo Pairs | Surround
AES Alarms: Change AES Alarm
Embedded Alarms: Change Embedded Alarms
AES Input Map: Change AES Input Map
Embedded Input Map: Change Emb. Input Map
272M Group Phase Align: Disabled | Enabled | Auto
299M Group Phase Align: Disabled | Enabled | Auto
Groups 1 & 2
Groups 3 & 4
Groups 1 & 3
Groups 2 & 4
Groups 1 & 4
Groups 2 & 3
Done
Embedded Groups
Audio In/Out Menu
Top Menu
Figure 2- 7: Configuration menu diagram - part 3