T-Mobile MDA III - Manual (Page 50)

T-Mobile MDA III User Manual 50
T-Mobile MDA III User Manual 51
6. When prompted, tap Yes to save your changes or tap No
to exit without saving your changes.
NOTE: If you have a contact with a name that uses special
characters, such as Ö or é, or phonetic sounds found in foreign
languages, it is recommended that you create a user pro-
nunciation for that contact. This will increase the recognition
accuracy of that contact.
Delete contact nicknames
To delete a nickname or user pronunciation you have as-
signed to a contact:
1. Highlight the contact name and tap the
-
button.
2. Tap OK in the upper right corner to exit VoiceDial
Settings .
3. When prompted, tap Yes to save your changes or tap No
to exit without saving your changes.
Enable or disable contacts
To enable or disable a contact from being recognized by
VoiceDial , check the box to the left of the name to enable
recognition; uncheck it to disable recognition. The entire list
of contacts may also be enabled or disabled by tapping the
check box in the column header. All contacts are selected
by default.
Synchronize the contact list
The contact name recognizer may be manually synchronized
with Microsoft Contacts by tapping the list box column head-
er entitled Sync . This is recommended when you change the
spelling of a name in the Contacts list.
Timing tab
a. Customize leading silence
Leading silence sets the maximum time the microphone will
listen for speech to begin. If speech is not detected within this
amount of time, the microphone will shut off. Adjust leading
silence to allow for adequate pause before speech. To adjust
leading silence, tap and drag the thumb of the Maximum
leading silence slider to the desired position. Alternatively,
you can tap the thumb and use the navigation pad to scroll
the thumb along the slider. Check the no limit box to allow
the microphone to stay on indefinitely, listening for speech to
begin. No limit is the default.
Tap here to synchronize with
Microsoft Contacts manually.