T-Mobile MDA III - Manual (Page 92)

T-Mobile III User Manual
92 T-Mobile MDA III User Manual 93
6. Enter a phone number. You may need to enter the country code and area code, depending on
where you are calling.
7. Tap OK to begin dialing.
To make this connection the default dial-up connection for Pocket Internet Explorer when
using Bluetooth modem, you still need to complete the following steps:
1. From the Today screen, tap > Settings > Connections tab.
2. Tap the Connections icon > Advanced tab > Select Networks .
3. Enable Bluetooth Settings from the drop-down list.
Send via Bluetooth
Pocket Outlook Contacts , Calendar items, and Tasks can be sent individually or collectively
to a remote device.
To send data via
Bluetooth transfer:
1. Tap > Programs , then open Calendar , Contacts or Tasks.
2. Highlight the item(s) to be sent
3. Tap-and-hold the item(s), and in the pop-up menu, tap
Send via Bluetooth .
4. On the Select a Bluetooth device screen, tap the name of the destination device, and then tap OK .
Bluetooth Personal Area Network
A Bluetooth personal area network is a private, temporary, ad-hoc network of up to eight
devices. A Bluetooth personal area network makes it easy to exchange information that would
normally require a TCP/IP network. For example, most chat utilities, multi-player games, etc.
are fully functional in a Bluetooth personal area network environment.
Bluetooth personal area networks are subject to the same security settings that govern
other Bluetooth communications (service availability, authorization, authentication, and en-
cryption).
One
Bluetooth device must be the host of the personal area network. Other Bluetooth devices
join the network as clients. The host can accept and reject clients on an individual basis.
To host a Personal Area Network :
1. Select Bluetooth Manager > New > Connect > Join a personal network > Next .
2. On the next wizard screen, select Host a personal network > Next .
3. Add remote devices to the Bluetooth Personal Area Network , if desired:
- Tap the Add button and select the device to be added.