Toshiba Portege G810 - Manual (Page 58)

Messaging
57
Messaging
• Gateway: - enter the WAP gateway to be used
for this connection.
• Port number: - enter the HTTP port number for
connecting to the MMS server and for file
transfer.
• Server address: - enter the URL address of the
MMS server.
• Connect via: - select the connection point for
the MMS server. This is typically The Internet.
• Send limit: - select the maximum MMS
message size permitted by your service
provider.
7. Tap Done.
Creating an MMS message
An MMS message can consist of many pages, also
known as 'slides'. Each slide can hold an image, a
sound and text, but you do not need to set all of
these for each message. The maximum amount of
content that can be sent in a message is set by your
service provider.
To create an MMS message:
1. From the Today screen, tap Start >
Messaging.
2. Tap Text Messages.
3. Tap Menu > New > MMS.
4. With the cursor in the To: field, add recipient(s)
using one or more of the following methods:
• Press the Action key, then tap a recipient from
the list of contacts.
• Tap Menu > Add Recipient > From
Contacts.../From Call History..., then tap a
recipient.
• Enter mobile phone number(s) in the To: field.
Use a semicolon to separate multiple recipients.
5. Enter a subject for the message in the Subject:
field if required.
6. Enter a message.
7. Tap Send when the message is ready.
TIP: If you have several MMS providers, you
can set one as the default. To do this, scroll to
the required MMSC entry, then tap Set as
Default. A red arrow mark is displayed next to
the default MMSC entry.
TIP: To preview the message before sending,
tap the Play icon.
TIP: To delete the message without sending
it, tap Menu > Cancel Message.