Trimble Outdoors JUNO ST handheld - Manual (Page 45)

Juno ST Handheld User Guide 43
Connecting to an Office Computer 4
Connecting the handheld to a computer
To connect the Juno ST handheld to a computer:
1. Make sure that the handheld and the computer are switched on.
2. Make sure you have installed the appropriate connection management software
onto the computer (see
Connection management software, page 42 ).
3. To form a connection, do one of the following:
– Connect one end of the USB data cable to the Power/USB socket on the
handheld, and connect the other end of the USB data cable to a USB port
on the computer.
Figure 4.1 Connecting the handheld to a computer using the USB data cable
– Use the handheld's integrated Bluetooth radio to establish a wireless serial
link to a Bluetooth-enabled computer. For more information, see
Using the
Bluetooth radio, page 61 .
Note – You cannot connect to the computer using Bluetooth wireless technology if you will
use the Windows Mobile Device Center to manage the connection.
When the handheld and the computer are connected, a window appears on the
office computer that enables you to manage the connection. See one of the
following:
– Managing the connection using the Windows Mobile Device Center,
page 44
– Managing the connection using ActiveSync technology, page 45