Trimble Outdoors JUNO ST handheld - Manual (Page 48)

4 Connecting to an Office Computer
46 Juno ST Handheld User Guide
4. To transfer files between the computer and the handheld, click Explore . A
Windows Explorer-type window appears, displaying files stored on the
handheld. Copy and paste files to other locations on your computer, or from
your computer to the handheld.
5. To install software onto the handheld, see Installing software, page 46 .
6. To uninstall software from the handheld, select Add/Remove Programs from the
Tools menu. Clear the check box beside the program you want to remove and
then click
OK .
For more information, refer to the ActiveSync Help.
B
Tip – If you have GPS Pathfinder Office software installed on your office computer, you
can configure the Connection Manager utility in the GPS Pathfinder Office software to
automatically detect when you connect a Juno ST handheld to the computer. This enables
you to automatically transfer data from the TerraSync software, differentially correct the
data, and then export it to a GIS. For more information, refer to the GPS Pathfinder Office
Software Help.
Installing software
The Juno ST handheld supports software designed to run on Windows Mobile powered
devices. You may also be able to install and run some software designed for other
operating systems.
To install software on the handheld:
1. Connect the handheld to a computer (see page 43 ).
2. Insert the software CD into the office computer and then run the installation
setup. For more information, refer to the installation instructions for the
software.
3. When prompted, select the install option for a Windows Mobile powered device.
Once the software is installed on the computer, it is automatically transferred to
the handheld.
Note – If an SD (Secure Digital) memory card is inserted in the handheld, the card
appears as an installation location option. Trimble recommends that you install software
to the handheld’s memory, not to an SD memory card. If you install software to a card and
then remove the card from the handheld, the software will not be available for use.
4. If prompted after installation, perform a soft reset of the handheld (see page 27 ).