Trimble Outdoors JUNO ST handheld - Manual (Page 52)

5 Using GPS
50 Juno ST Handheld User Guide
To be able to differentially correct your ArcPad GPS data, install version 2.20 or later of
the Trimble GPScorrect extension for ESRI ArcPad software on a Juno ST handheld.
Make sure you install ArcPad before you install the GPScorrect extension.
Note – Make sure your version of the GPScorrect extension is compatible with the version
of ArcPad software you are using. For more information, go to
www.trimble.com/gpscorrect_ts.asp , click Support Notes and then search for the Mapping
and GIS Product Compatibility List Support Note.
To install the GPScorrect extension, either insert the Trimble GPScorrect Extension for
ESRI ArcPad Software CD in the CD-ROM drive of a computer and use the menus
provided, or run the downloaded setup file. Detailed installation instructions are
provided in the Trimble GPScorrect Extension Release Notes.
GPS Controller software
You can install version 2.11 or later of the GPS Controller software on a Juno ST
handheld. Use the software to configure and monitor the status of the internal GPS
receiver.
To install the GPS Controller software, go to www.trimble.com/support.shtml , click
GPS Controller and then click Downloads. Click the link for the version you want to
install and then follow the instructions in the Installation Wizard.
Other GPS field applications
You can use the Juno ST handheld with a custom application developed using version
2.20 or later of the Trimble GPS Pathfinder Tools Software Development Kit (SDK).
You can also use the Juno ST handheld with any GPS field software that accepts NMEA
messages.