Therma-Tru Hinged Patio Door System Single Panel Assembly Unit - Manual (Page 11)

FLANGE INSTALLATION
8
Align and Install Side Flanges
Align edge of side flange with bottom
of side jambs.
Firmly press into kerf in jamb using
a rubber mallet if necessary.
Flange will be set back approximately
1/2” from top edge of jamb.
Install Top Flange
Center top flange into head jamb
kerf and press into place using
a rubber mallet if necessary.
Side Flange
Top Flange
Side F
lange
Align
Inswing Outswing
NOTE: Inswing application shown.
10