Therma-Tru Hinged Patio Door System Single Panel Assembly Unit - Manual (Page 13)

DOOR INSTALLATION - continued
9
Engage Hinge Knuckles
Tap with hammer or rubber mallet as
required to line up hinge knuckles and
engage.
Install Hinge Pins
Tap in pins. Be certain
to insert pins so heads
are on top edges of
hinges.
Hinge Pin
Door
Door Frame
#8 x 3/4”
flat head
screws
Adjustable Hinge Option
Fasten door panel
to frame
Prop up hinge side of
door panel until hinges
can align into mortises
on hinge jamb.
Fasten door panel to
frame with #8 x 3/4”
flat head screws,
(2) in top hinge and
(3) in middle and
bottom hinge.
Prop up
#8 x 3/4”
12