Making connections (continued) – Tascam D00851300A User Manual
Page 13
TASCAM CD-BT1MKII —
13
Output to headphones and
external devices
Connect headphones to the
PHONES
jack.
Use the stereo
LINE OUT
jack to
connect the CD-BT1MKII to
external devices, such as speak-
ers with a built-in amplifier, AUX
input jacks of a stereo system, cas-
sette tape recorders, or CD record-
ers.
Adjusting the output level
You can adjust the output level of
LINE OUT
and
PHONES
by using the
OUTPUT
control.
NOTE
The levels from both the
LINE OUT
and
PHONES
jacks are controlled together by
the
OUTPUT
control and cannot be adjust-
ed independently.
When you have a recording device connect-
ed to the
LINE OUT
jack, remember that
the
OUTPUT
control affects the recording
level.
Connecting a footswitch
RC-30P
FOOTSWITCH
Connect a TASCAM RC-30P
(sold separately) to the
FOOT
jack.
You can set the polarity (push-
to-make / push-to-break) of the
footswitch using the
POL
item in
the Setup menu.
CAUTION
To avoid problems with your CD-BT1MKII,
use only a footswitch such as the TASCAM
RC-30P (sold separately) that has a standard
phone (tip and sleeve) plug.
Making Connections (Continued)