Tascam D00851300A - Manual (Page 14)

14
— TASCAM CD-BT1MKII
Entering the menu system
To enter the menu category of your
choice, do the following:
 Effect menu (bass guitar effects)
After selecting an effect slot, press
and hold the EFFECT/EDIT key
 EQ menu (equalizer)
After selecting an EQ slot (A or B),
press and hold the EQ/EDIT key
 Tuner menu (bass guitar tuner)
Tap the
TUNER/SETUP key
 Setup menu (system setup)
Press and hold down the
TUNER/
SETUP key
 Tempo/Key menu (changing tem-
po and pitch of CD)
Tap the TMP/KEY / CD EFF key
 CD Effect menu (CD playback ef-
fects)
Press and hold down the TMP/
KEY / CD EFF key
 Metronome menu
Press and hold down the
STOP
key.
The menu then shows the menu cate-
gory you select, reversed and blinking.
Menu
Category Menu
Item Values (default values
are underlined) Notes
EFFECT EFF ON/OFF turns effect on or off
LIB 1 – 4, c1 – c7, d1 – d5 preset number
Parameter – depends on effect type
LVL 0 to 64 effect output level
EQ EQ L/ EQLM/
EQ M/
EQMH/ EQ H
-15 – 0 – +15
adjusts the gain of the
equalizer band (low, mid-
low, mid, mid-high, high)
MID ON/OFF
turns mid shaping function
on or off
TUNER
TUNE MODE=BAS: 5B, 4E, 3A, 2D, 1G
sets string number in Bass
Mode
MODE CHR/BAS selects tuner mode
OSC OFF, _C – _B, C – A, B,
_
C –
_
B,
(3 octaves)
sets pitch of the oscillator
CAL 435–440–445
sets base frequency (A4,
unit: Hz)
SETUP
MIX B10 – B1, 0, C1 – C10
sets mix balance between
CD and input
PLAY ALL/SGL
selects all or single play
CUE CUE/FLS selects action of CUE
Using the menu system