About the power supply, Operation using batteries – Tascam D00851300A User Manual

Page 7

Advertising
background image

TASCAM CD-BT1MKII —

7

About the power supply

Operation using batteries

Remove the cover of the battery

compartment at the back of the CD-

BT1MKII and insert four AA (SUM-

3) batteries (not supplied) following

the + and – markings inside the battery

compartment.

CAUTION

We strongly recommend the use of recharge-
able Ni-MH batteries (alkaline batteries may
also be used). Your CD-BT1MKII may not op-
erate properly with batteries of other types.

WARNING

Misuse of batteries may cause leaks and ex-
plosions. Please carefully read and follow the
instructions below:

Notes on batteries

 When you are using the CD-

BT1MKII with batteries, unplug

the AC adapter.

 Make sure the batteries are in-

serted in the correct direction, ac-

cording to the markings inside the

battery compartment.

 Always use batteries of the same

type, and replace all batteries to-

gether.

 Do not attempt to recharge batter-

ies that are not rechargeable.

 If you are not going to use the

CD-BT1MKII for longer than

one month, remove the batteries.

 Do not throw batteries into water

or fire. Do not disassemble batter-

ies.

 If a battery leaks in the compart-

ment, wipe the liquid away com-

pletely with a disposable cloth.

Make certain no residue remains
before inserting new batteries.

Remaining battery charge level
display

When the CD-BT1MKII is running

on batteries, a rough indication of the

remaining battery charge is displayed as

as the battery symbol as follows:
3 parts are lit
There is plenty of battery charge left.
2 parts are lit
Battery charge is approximately half.
1 part is lit
Not much battery charge is left.
3 parts blink
Battery charge is nearly gone. Replace

with fully charged batteries.

Length of battery life

 Ni-MH batteries: Approx. 4.5 hours
 Alkaline batteries: Approx. 1.5 hours

Auto power-save

While using battery power, the CD

player and CD functions of the CD-

BT1MKII shut down automatically if

any of the following conditions lasts

more than 5 minutes: (the CD part of

the display shows

CD OFF

).

(continued on the next page)

Advertising