Tascam D00851300A - Manual (Page 21)

TASCAM CD-BT1MKII —
21
The CD-BT1MKII has a 5-band equal-
izer for bass guitar input and two EQ
slots (A and B) for the equalizer.
After an EQ slot is selected and you edit
the equalizer settings, the edited EQ
settings will automatically be stored in
the selected EQ slot.
Setting the equalizer
1. Tap the EQ/EDIT key to select ei-
ther EQ slot A or B (pressing the
EQ/EDIT key cycles through EQ
slot A, B, and OFF).
2. Press and hold the EQ/EDIT key
to enter the EQ menu.
3. Select a parameter from the choic-
es below by pressing either the
PREV or NEXT key:
 EQ L (Lo : 80 Hz)
 EQLM (Lo-Mid : 200 Hz)
 EQ M (Mid : 500 Hz)
 EQHM (Hi-Mid : 1.25 kHz)
 EQ H (Treble : 3.15 kHz)
 MID Mid Shape (EQ adjust
ment) ON/OFF
4. When the selected parameter ap-
pears on the display, use either the
UP or DOWN key to adjust the
level of gain. The available range
of values for adjustment is be-
tween -15 – +15.
5. Press the TIME/ESC key to exit
the EQ menu and return to the
home display mode. The param-
eters set in the EQ menu are au-
tomatically saved in the EQ slot
selected in step 1.
Recalling equalizer settings
Press the EQ/EDIT key to select the EQ
slot you want to recall.
TIP
If you have connected a footswitch such as
TASCAM RC-30P (sold separately), you can
step through the bank slots by pressing the
footswitch. Make sure that FOOT in the Setup
menu is set to EQ+.
Equalizer