Tandberg Data NAS Hardware Viking FS-1500 - Manual (Page 108)

Tandberg Data Distributed File System
__________________________________________________________________________________________________
7-18 Tandberg Viking Series Storage Server Administration Manual
o
Members to Include - Accept the defaults.
o
Options - Ensure that Yes, count backlogged files in this
report is selected, and also click the Count the replicated
files and their sizes on each member check box.
o
Review Settings and Create Report - Click Create to
create the diagnostic report.
o
Confirmation - The wizard closes automatically, and the
diagnostic report appears.
Review the diagnostic report created for the Tools replication group. In
particular, take a look at the following sections:
• Note the DFS Replication efficiency savings. This savings will
change over time as files are added and changed.
• Review any errors or warnings, if any, for the members. These are
typically event log errors that appear in the member's respective
DFS Replication event log.
• In the informational section for each member, review the replicated
folder status (the status will be "Normal" after initial replication is
complete) and other information. Notice that the primary member will
show different statistics from the non-primary member; this is
because data originated from the primary member and replicated to
the non-primary member during initial replication.
7.5.9. Browse the Namespace
In this task, you browse the namespace you created and view the referrals in
the client’s referral cache as you browse portions of the namespace. Viewing
referrals cached on the client is useful in troubleshooting scenarios. The
following procedures assume you are performing these tasks from a client
computer running Windows XP or Windows Server 2003.
To browse to the namespace root and view the root referral:
1. Click Start, click Run, type \\server_or_domain\Public, and then
click OK. Windows Explorer opens and your view of the namespace
looks similar to the following figure: