Tandberg Data NAS Hardware Viking FS-1500 - Manual (Page 83)

Tandberg Data Folder & Share Management
__________________________________________________________________________________________________
6-19 Tandberg Viking Series Storage Server Administration Manual
AFP (Appletalk) Sharing
AppleTalk shares can be set up only after AppleTalk Protocol and File
Services for Macintosh have been installed on the NAS appliance.
Note
AppleTalk shares should not be created on clustered resources as data loss can
occur due to local memory use.
Instaling the AppleTalk Protocol
To install the AppleTalk Protocol:
1. From the desktop of the NAS server, click Start, navigate to Control
Panel > Network Connections > Local Area Connection. Right-
click and select Properties from the pop-up menu, and then click on
Install….
2. Select Protocol and click Add….
3. Select AppleTalk Protocol and click OK.
4. Click Close to finish the installation.