Tandberg Data NAS Hardware Viking FS-1500 - Manual (Page 133)

Tandberg Data Microsoft Services for Network File System (MSNFS)
__________________________________________________________________________________________________
8-13 Tandberg Viking Series Storage Server Administration Manual
To restart the User Name Mapping service:
1. On the computer running the User Name Mapping service, click
Start, point to Administrative Tools, and click Services.
2. In the list, right-click User Name Mapping, click Stop, wait for the
service to stop, and then click Start.
Notes
To perform this procedure, you must be a member of the Administrators group on
the local computer, or you must have been delegated the appropriate authority.
8.6.7. Specifying the User Name Mapping server
On each computer running a component of Microsoft Services for NFS, you
need to specify the name of the computer running the User Name Mapping
service. This is necessary even in a simple installation where all Microsoft
Services for NFS components are installed on the same computer.
To specify the User Name Mapping server:
1. On a computer running one or more components of Microsoft
Services for NFS, open Microsoft Services for NFS. To open
Microsoft Services for NFS, click Start, point to Administrative
Tools, and then click Microsoft Services for Network File System.
2. In the console tree, right-click Microsoft Services for Network File
System and click Properties.
3. In User Name Mapping Server, type the name of the computer
running the User Name Mapping service, and then click OK.
4. Repeat these steps on each computer that is running one or more
components of Microsoft Services for NFS.
Notes
To perform this procedure, you must be a member of the Administrators group on
the local computer, or you must have been delegated the appropriate authority.
8.6.8. Creating an NFS shared folder
The next step is to use NFS sharing to create an NFS shared folder on the
computer running Server for NFS. You can later mount this shared folder on
a UNIX client and create a test file on it.