Tandberg Data NAS Hardware Viking FS-1500 - Manual (Page 130)

Tandberg Data Microsoft Services for Network File System (MSNFS)
__________________________________________________________________________________________________
8-10 Tandberg Viking Series Storage Server Administration Manual
Notes
To perform this procedure, you must be a member of the Administrators group on
the local computer, or you must have been delegated the appropriate authority.
8.6.6.2. Edit the .maphosts file
Next, you need to add entries to the .maphosts file, which is installed with
User Name Mapping. This file controls which computers on the network can
access User Name Mapping, so you need to add an entry for each computer
you are using in this test that is running either Server for NFS or Client for
NFS.
You can edit the .maphosts file in a text editor. The .maphosts file is
located in %windir%\msnfs on the computer running User Name Mapping.
The .maphosts file contains a list of one or more of the elements described
in the following table, each on a separate line. The order of the elements is
important because, when matching a computer making a request against the
list, User Name Mapping searches from the top down until it finds a match.
Element Description
Host
Specifies one or more computers that can access
User Name Mapping. The host can be specified
by an Internet Protocol (IP) address (IP version
4), or a host name that resolves to one or more
IP addresses.
host –
Specifies one or more computers that are denied
access to User Name Mapping. The host can be
specified by an IP address (IP version 4), or a
host name that resolves to one or more IP
addresses. Note that there must be at least one
blank space between host and the dash (–).
+
Specifies that all computers can access User
Name Mapping unless disallowed by an earlier
entry in the list. All entries in the list following this
element are ignored.
–
Specifies that all computers are disallowed
access to User Name Mapping unless allowed by
an earlier entry in the list. All entries in the list
following this element are ignored.
Examples
A .maphosts file with the following contents allows access only by
computers named R2_host, UNIX_host, Windows_DC, and NIS_host:
R2_host
UNIX_host
Windows_DC
NIS_host
-