Tandberg Data NAS Hardware Viking FS-1500 - Manual (Page 109)

Tandberg Data Distributed File System
__________________________________________________________________________________________________
7-19 Tandberg Viking Series Storage Server Administration Manual
2. In Windows Explorer, click the Folders button to display the Public
root in the folder tree.
3. In the folder tree, right-click Public, and then click Properties to
open the Properties dialog box.
4. On the DFS tab, review the paths listed under Referral list. These
are the root targets in the root referral that the client received when it
accessed \\server_or_domain\Public. These should match the root
targets you created earlier in this guide. The target marked Active is
the target currently connected to your client computer.
5. Click OK to close the dialog box.
To browse to the Tools and Training Demos folders and view their folder
referrals:
1. In Windows Explorer, double-click the Software folder. You should
see two folders, Tools and Training Demos.
2. Double-click the Tools folder to open it.
3. In the folder tree, right-click the Tools folder, and then click
Properties.
4. On the DFS tab, review the paths listed under Referral list. These
are the folder targets in the folder referral that the client received
when it accessed \\server_or_domain\Public\Software\Tools.
These should match the folder targets you created earlier in this
guide, and the target you marked as Last among all targets, when
you set the target priority, should be listed last. The target marked
Active is the target currently connected to your client computer.
5. Click OK to close the dialog box.
6. Click the Training Demos folder in the folder tree to open it.
7. Right-click the Training Demos folder in the folder tree, click
Properties, and then click the DFS tab. Notice that only one folder
target is listed in the referral list. Your client computer is currently
connected to this folder target.
7.5.10. Test Failover
In this task, disable the network card or turn off the server that hosts one of
the root targets for the \\domain\Public namespace. Do the same for a
server that hosts one of the folder targets for the Tools folder. After the
network cards are disabled or the servers are turned off, repeat the
procedures in "Task 9: Browse the Namespace." The procedures should
work because another server continues to host the \\domain\Public
namespace and the Tools folder.