L-band satellite differential correction receiver, Receiver default settings – Trimble Outdoors 132 User Manual
Page 134
E Specifications
1 3 4 DSM 132/132RS Receiver User Guide
E.5
L-Band Satellite Differential Correction Receiver
Table E.5 lists the characteristics of the L-band satellite differential
correction receiver with multiple vendor support.
E.6
Receiver Default Settings
Table E.6 lists the receiver default settings.
Frequency offset
17 ppm maximum
3rd order intercept
+15 dBm @ RF input (min. AGC
setting)
Beacon acquisition time
<5 seconds, typical
Operating modes
Auto Power, Auto Range, and Manual
Table E.5
L-Band satellite differential correction receiver with
multiple vendor support characteristics
Bit error rate
10
-5
for Eb/N of >5.5 dB
Acquisition and reacquisition time
<5 seconds, typical
Frequency band
1525–1560 MHz
Channel spacing
5 kHz
Table E.6
Receiver default settings
DGPS Source
WAAS/EGNOS
Dynamics
Land
Minimum elevation
8°
AMU mask
3
PDOP Mask
13°
PDOP 2D/3D switch
11
PV Filter
D&S (Dynamic and Static mode)
Table E.4
Beacon Channels (continued)