Configuring beacon dgps – Trimble Outdoors 132 User Manual
Page 70
Advertising
5 Configuring the Receiver
7 0 DSM 132/132RS Receiver User Guide
3.
Once activation succeeds, the Home screen displays D/3D:
5.1
Configuring Beacon DGPS
DSM 132 receivers are configured by default to use WAAS/EGNOS
in Auto Range DGPS mode. To change a DSM 132 receiver to
Satellite DGPS mode, see page 66.
Select the frequency of the channels to be used when receiving RTCM
SC-104 broadcasts from radiobeacons:
1.
Navigate to the DGPS Source screen.
2.
If the screen does not display Beacon Only, press
3 to select
the Data Source field. Then press
2 until Beacon Only
appears.
3.
Press
4 to save the changes.
4.
Press
2 until the Beacon Mode screen appears:
D/3D í07 DOP03
WAAS 122 чш04
Advertising
This manual is related to the following products: