Trimble Outdoors 132 - Manual (Page 64)

5 Configuring the Receiver
6 4 DSM 132/132RS Receiver User Guide
• Thales-LandStar at 1-888-434-7757
www.landstar-dgps.com/
You will need to provide a serial number and user code:
1. Navigate to the Serial number screen.
Note the serial number here:
2. Navigate to the Omni* or Thales Srv Info screen.
Note the user code here:
To configure the DGPS Source for the subscription service:
1. Navigate to the DGPS Source screen.
2. Press 3 to activate the cursor.
3. Press 2 until Satellite Only appears:
4. Press 4 to save the changes.
5. Press 5 to return to the DGPS Config menu.
To configure the provider name and the correct satellite coverage
beam:
1. From the DGPS Config menu, press 2 until the EZ Sat screen
appears.
Note – The EZ Sat screen includes the Coverage Beam field and
the Geographic Location field.
2. Press 3 to activate the cursor.