Trimble Outdoors 132 - Manual (Page 32)

3 Installing the Receiver
3 2 DSM 132/132RS Receiver User Guide
3.2
Connecting to an External Device
After installing the receiver and antenna, connect and route the
power/data cable (PN 30945). The receiver can be powered by a
vehicle or by a customer-supplied 10–32 VDC power source.
Figure 3.3 shows how to connect the receiver to an external device
using the 5.5 m (18 ft) standard power/data cable.
Figure 3.3 Standard power/data cable connections
+
-
AgGPS 124/ 13 2
9–pin port
Cable 30945
DSM 132 receiver
Connect cable 30945
Power
Red
to Port A
Ground
–ve
Black
ve
Antenna cable