TANDBERG 7000 MXP - Manual (Page 159)

Administrator Settings
159
4.5.4 Stereo Settings
Stereo I/O mode
If stereo I/O mode is activated, audio input 5 and 6 and audio output 2 and 3 will behave as a
stereo input/output pair, left and right. The VCR Ducking and AGC setting for audio input 6 will in
this case apply to both audio input 5 and 6.
If stereo I/O mode is off, Audio out 2 will be a mix of audio input 6, microphones and the far end.
Audio out 3 will be a mix of audio input 5, microphones and the far end. If stereo I/O mode is on,
Audio out 2 (left stereo channel) will be a mix of the microphones and the far end left channel.
Audio out 3 (right stereo channel) will be a mix of the microphones and the far end right channel.
Note that you are able to receive stereo through Audio out 1 (S/PDIF) independent of this setting.
Stereo Speakers
To be able to get stereo sound, the Stereo Speakers has to be connected to the Digital NAM and
stereo speakers has to be enabled in the main audio menu (Stereo Speakers = On). Stereo
sound will be present if you either receive stereo sound from far end or you have connected a
stereo sound source to the audio 5 and 6 input pair and enabled stereo I/O mode.
Note that if Stereo Speakers are enabled in the menu without having any stereo speakers
connected to the Digital NAM, it may cause the acoustic echo-canceller to malfunction.