TANDBERG 7000 MXP User Manual

Page 16

Advertising
background image

D1335403_T7000_MXP_User_Manual

16

the signal from 20 meters to 2 meters. This will prevent you from unintentionally controlling your
neighbor's video system, when you control your own system.


Table microphone

The high quality table microphone is designed to use on a table during a videoconference. You
can connect up to three microphones. The ideal location for the microphone is on a flat surface at
least 2m (6.5 ft) from the front of the system. The microphone cable should always point towards
the system. The system will automatically equalize sound levels. Loud and soft voices are picked
up and transmitted to the far end at approximately the same level.



Digital Natural Audio Module

The Digital Natural Audio Module (DNAM) is designed to enhance audio quality during a
videoconference. The DNAM provides natural sounding audio - as if the person, or another sound
source, in conference is present in the same room as you.

The DNAM is a frequency-compensated sound system optimized for voice and other sounds that
appears in modern videoconferencing. It is designed and dedicated specifically for
videoconferencing requirements. Use of the highest quality speaker elements as well as proper
amplifier- and software techniques minimizes signal distortion.

The system will automatically detect the DNAM and optimize the audio output. Once detected the
audio output will be in digital format (S/PDIF). The DNAM supports both analog and digital input.

The DNAM is mounted in the bottom of the system, below the speaker cabinet.

Advertising